Written repair summary
Parts used and what failed
Sump Pump Repair Naples FL: Fast, Code-Correct Fixes
When your sump pump quits, water starts winning. We provide sump pump repair Naples FL homeowners call at 2 a.m. after a storm, when the pit fills and the float switch sticks. Our techs diagnose failed float switches, clogged discharge lines, and burned-out motors on Zoeller, Wayne, and Liberty Pumps units. We carry common parts on every truck, so most repairs finish in one visit.
- Failed float switch
- Clogged discharge line
- Backup pump failure
- Written scope firstFlat price before we start
- Full cycle testPump runs three times before we leave
- Parts on the truckPumps, floats, valves, batteries
- Pit left cleanDebris removed, basin rinsed
What Our Sump Pump Repair Includes
Every repair covers the pump, the float switch, the check valve, and the discharge line. We test the full system, not just the part that failed. If we find a second problem during the repair, we tell you before we fix it. Parts and labor are quoted upfront.
- Float Switch TestingWe test the float switch through its full travel range and replace it if it sticks, hangs, or fails to trigger the pump. A failed float switch is the most common reason a pump won't start in Naples.
- Check Valve InspectionWe inspect the check valve for leaks and debris that let water drain back into the pit. A bad valve makes the pump run constantly. We replace it if it fails and seal the threads on install.
- Discharge Line ClearingWe clear clogs from the discharge line and check for cracks, freeze damage, and improper slope. A blocked line is the second most common cause of a pump that runs but doesn't move water.
- Motor and Impeller CheckWe test the motor windings with a meter and inspect the impeller for grit and debris. If the motor is burned out, we tell you and quote a replacement rather than a repair that won't last.
- Full System TestAfter the repair, we run the pump through three full fill-and-discharge cycles. We confirm it starts, moves water, and shuts off at the right level before we pack up and leave.
Sump Pump Repair for Homes
A failed sump pump can flood your crawl space or basement within hours. We repair the pump, test the float switch and check valve, and leave the pit dry.
- Pump runs constantly
- Pit fills during storms
- Pump won't turn on
- Backup won't engage
Sump Pump Repair for Businesses
Property managers and business owners need sump pumps that work every storm. We repair pumps in multi-unit buildings, retail spaces, and shared pits.
- Multi-unitShared pits and discharge lines repaired and tested
- RetailPumps kept running through storm season
- CondoBasement and garage pits repaired on schedule
- OfficeDischarge lines cleared and check valves replaced
What Sump Pump Repair Naples FL Actually Involves
Sump pump repair Naples FL is the diagnostic and mechanical work that restores a failed pump to full drainage capacity. We pull the pump from the sump basin, test the float switch through its full travel, inspect the check valve and discharge line for clogs or freeze damage, and check the motor windings for burnout. If the pump is a submersible Zoeller or a pedestal Wayne, we test the switch, the impeller, and the check valve before recommending any replacement. Most jobs are a float switch, a check valve, or a clogged discharge line, not a whole new pump.
Naples sits on a high water table, and October's afternoon storms push groundwater into sump pits across Collier County. A pump that ran fine in June can be running constantly by fall. If your sump pump is not turning on, or the pit is filling with water while the pump hums, you need a sump pump fix Naples tech who knows the difference between a stuck float and a dead motor. We see it in Old Naples bungalows and North Naples two-story homes alike.
We find the failed part, repair it, and test the whole system before we leave.
How Our Sump Pump Repair Process Works
Every repair follows the same five steps. You get a call when we're on the way, a clear explanation of what failed, and a test run before we leave. No mystery invoices.
Phone Diagnosis
You call and describe the symptoms: pump running constantly, not turning on, loud noise, or water rising. We ask about the brand, the pit depth, and whether the discharge line exits above or below grade. That five-minute call tells us which parts to load and whether you need emergency priority.
On-Site Inspection
A tech arrives, pulls the pump from the sump basin, and tests the float switch through its full range. We inspect the check valve, the discharge line for clogs or freeze damage, and the sump pit liner for cracks. We check the motor windings with a meter. This takes 20 to 30 minutes.
Upfront Repair Quote
We tell you what failed, what it costs to fix, and what a replacement would cost if the motor is burned out. You get one number before we start. If the repair is a $180 float switch, we say so. If the pump is dead, we quote a replacement and let you decide.
Repair and Test
We replace the failed float switch, check valve, gasket, or discharge line section, then run the pump through three full fill-and-discharge cycles. We watch the pit drain, check for leaks at every joint, and confirm the pump shuts off at the right water level. Most repairs take one to two hours.
Cleanup and Walkthrough
We wipe down the pit area, haul away the old parts, and walk you through what failed and how to spot it next time. You get a written summary of the repair and the parts used. If we installed a battery backup system or sump pump alarm, we test those too before we leave.
Tools and Methods We Use
Zoeller and Liberty Pumps float switches
Replacement switches matched to your pump brand and pit depth. We stock the common models so we can replace a failed switch on the spot.
PVC discharge pipe and check valves
Code-correct discharge line repairs and replacements. We cut, fit, and seal the pipe, then test the line under load before we leave.
Multimeter
Tests motor windings, float switch continuity, and outlet voltage. It tells us whether the pump is dead or the switch failed.
Sump pump alarm and battery backup system
We install and test alarms and battery backups so you know when the pit is filling and the backup engages during an outage.
Sump basin liner and sealant
Repairs cracked basins and pits that let groundwater seep in. We seal the cracks and confirm the pump sits level.
Perforated drain pipe and gravel
French drain and drainage system work that reduces how hard your sump pump has to work during storms.
Float switch travel test
We move the float through its full range and watch the pump engage and disengage. A switch that sticks or hangs fails the test and gets replaced. This catches the most common cause of a pump that won't start.
Three-cycle discharge test
After every repair, we fill the pit and run the pump through three full cycles. We confirm it starts, moves water, and shuts off at the right level. If it fails any cycle, we keep working until it passes.
When Naples Homeowners Call Us
Your pump ran fine all summer but started running constantly after the first October storm.
We test the check valve and float switch, clear any grit from the pit, and confirm the pump shuts off at the right level. Most constant-running calls are a check valve or float switch fix. The pump cycles normally again, your power bill drops, and the motor isn't burning itself out.
The power went out during a storm and your battery backup didn't engage.
We test the backup pump and battery under simulated power loss, replace the dead battery or stuck float switch, and confirm the switchover works. We install new battery backup systems if yours is beyond repair. The next outage won't leave your pit filling. The backup engages when the primary stops.
You're buying a home in Old Naples and the inspection flagged a sump pump that won't turn on.
We inspect the pump, float switch, check valve, and discharge line, then repair what failed. You get a written summary of the repair and the parts used for your closing file. The pump works, the pit drains, and you have documentation for the sale.
Your crawl space sump pit fills with water every time it rains, and the pump can't keep up.
We check the pump capacity against the water table, clear the discharge line, and test the flow rate. If the pump is undersized, we install a higher-capacity unit sized for your pit. The pit drains during storms instead of filling, and your crawl space stays dry.
How Sump Pump Repair Runs in Naples
Naples sits on a high water table, and October's afternoon storms push groundwater into sump pits across Collier County. A pump that ran fine in June can be running constantly by fall. We see it in Old Naples bungalows with shallow pits, in North Naples two-story homes with basement pits, and in Golden Gate slab homes where the pit sits in a closet. Florida Building Code requires proper discharge line slope and an air gap or check valve to prevent backflow, and NEC electrical code governs the pump circuit and GFCI protection. If you need a sump pump repair service Naples FL homeowners trust, we test the float switch, check valve, and discharge line on every call. For a 24/7 sump pump repair Naples FL emergency, we dispatch with a backup pump and common parts on board.
- Old NaplesOlder bungalows often have shallow pits and original discharge lines. We check for undersized pumps and corroded check valves.
- North NaplesTwo-story homes with basement pits need higher-capacity pumps. We size the pump to the pit and water table.
- Golden GateSlab homes with closet pits collect grit that jams float switches. We clean the pit and test the switch on every repair.
- Pelican BayCondo and villa pits often share discharge lines. We confirm the line drains properly and the check valve seals.
- Port RoyalWaterfront homes face a higher water table. We test pump capacity and recommend a backup system when the pit fills fast.
- High water table across Collier CountyGroundwater pushes into pits year-round, so pumps run more often and wear out faster. We size repairs and replacements for the local water table, not a national average.
From problem to finished result.
Constant Running Pump Fixed
BeforeA homeowner in Old Naples called because the pump ran 24 hours a day and the power bill had jumped. The check valve was letting water drain back into the pit, so the pump never reached its shutoff level.
AfterWe replaced the check valve, sealed the threads, and tested the pump through three cycles. It now shuts off at the right level and runs about 15 minutes a day instead of constantly.
We recommend checking the check valve each spring and keeping the pit clear of grit. A $180 valve replacement saved the motor from burning out.
Dead Pump Replaced Same Day
BeforeAfter an October storm, a North Naples homeowner found the pit filling and the pump silent. The float switch tested fine, but the motor windings were burned out. The pump was 12 years old.
AfterWe had a compatible submersible pump on the truck and installed it the same afternoon. The new pump moved water through three full cycles, and the pit was dry before we left.
We set the float switch height for the pit and recommended a battery backup system so the next outage doesn't leave the pit filling.
Cracked Basin Repaired
BeforeA property manager in Pelican Bay reported a pit that never fully drained. The basin had a hairline crack letting groundwater seep in, and the pump cycled every few minutes.
AfterWe sealed the crack, replaced the check valve, and tested the system. The pit now drains fully, and the pump cycles normally instead of every few minutes.
We recommended an annual pit inspection and a sump pump alarm so the manager knows if the water level rises between visits.
Sump Pump Problems We Fix in Naples
Most sump pump failures in Naples trace back to four causes: a stuck float switch, a clogged discharge line, a failed check valve, or a burned-out motor. We diagnose the actual failure instead of guessing, and we test the whole system after the repair.
Sump pump running constantly
We inspect the check valve and float switch, replace the failed part, and confirm the pump shuts off at the right water level. Most constant-running fixes are a check valve or float switch replacement. The pump never shuts off, which burns the motor and spikes your power bill. A check valve that lets water drain back into the pit is usually the cause.
Sump pump not turning on
We test the float switch, the outlet, and the motor windings on site. If the switch failed, we replace it. If the motor is dead, we quote a replacement and have common units on the truck. The pit fills while the pump sits silent. A failed float switch, a tripped GFCI, or a burned-out motor are the usual culprits. Water reaches your slab within hours.
Sump pit filling with water
We pull the pump, clear the impeller and discharge line, and test the flow rate. If the pump is undersized for the water table, we recommend a higher-capacity unit and install it. A high water table and October storms push groundwater into the pit faster than a weak pump can move it. If the pump is running but the pit still fills, the impeller or discharge line is blocked.
Sump pump making loud noise
We pull the pump, clean the impeller, tighten or replace the check valve, and test the motor. If the bearing is failing, we tell you and quote a replacement before it seizes. Grinding or rattling means grit in the impeller, a loose check valve, or a failing motor bearing. Ignoring it leads to a mid-storm failure.
Backup pump failure during power outage
We test the backup pump under simulated power loss, replace the battery or float switch, and confirm the switchover works. We install battery backup systems and water-powered backups if you don't have one. When the primary pump stops and the backup doesn't engage, the pit fills fast. A dead battery or a stuck float on the backup unit is usually the cause.
We repair the pump, test the system, and leave the pit dry.
Same-Day Sump Pump Fix
We schedule same-day sump pump fix Naples appointments for calls before 2 p.m., and we keep common float switches, check valves, and gaskets on every truck. That means one visit, not two. If your pump is running constantly or not turning on at all, we test the switch and motor on site and repair what failed.
Code-Correct Repairs
Every repair follows NEC electrical code and Florida Building Code requirements for sump pit wiring and discharge. We use PVC discharge pipe, proper check valves, and sealed gaskets so the repair passes inspection. A sump pump repair service Naples FL homeowners can hand to a buyer without a callback.
Emergency Sump Pump Repair
Emergency sump pump repair Naples FL calls get priority when your pit is filling and the pump is dead. We answer the phone, walk you through shutting off the water if needed, and dispatch a tech with a backup pump and battery backup system options. Water damage costs thousands; a repair costs hundreds.
All Major Brands Serviced
We repair Zoeller, Wayne, Little Giant, Liberty Pumps, Flotec, Basement Watchdog, Superior Pump, and Everbilt units. Our techs know the float switch geometry and check valve threads on each brand, so we don't guess. If a part is under manufacturer warranty, we document the failure and handle the claim.
Sump Pump Repair Pricing in Naples
Typical 2026 pricing for sump pump repair in Naples runs $180 to $450, depending on the part and the pump type. A float switch replacement is usually at the low end. A check valve plus discharge line repair lands in the middle. If the motor is burned out, a replacement pump adds $250 to $600 for the unit. We quote the repair before we start, so you know the number. No surprise invoices.
What your estimate is based on
- Part that failedA float switch is the cheapest common repair. A check valve or a section of discharge line costs more. A burned-out motor means a replacement pump, which is the highest-cost repair.
- Pump type and brandSubmersible and pedestal pumps use different switches and valves. Zoeller, Wayne, and Liberty Pumps parts are widely available, but some older or off-brand units take longer to match.
- Pit access and depthA shallow closet pit is quick to work in. A deep basement pit or a crawl space pit takes longer to access, which adds labor. We tell you before we start.
- Discharge line conditionIf the discharge line is clogged or cracked, we clear or replace the affected section. A long run or a buried line takes more time and materials than a short, accessible one.
- Emergency or after-hours callEmergency sump pump repair Naples FL calls after hours carry a higher labor rate. If your pit is filling, the priority dispatch is worth it. We quote the rate on the phone.
$180 - $850 depending on scope A repair costs hundreds. Water damage from a failed pump costs thousands. We fix the actual failure, test the whole system, and leave the pit dry. That's the value.
What you receive
Clear records you can keep and share.
Test results
Three-cycle discharge test confirmed
Maintenance advice
What to check before storm season
What Naples Homeowners Should Know About Sump Pumps
A sump pump that runs constantly is not working harder, it is failing. Most constant-running pumps have a bad check valve or a float switch that never reaches its shutoff level.
Float switch first
A failed float switch is the most common reason a pump won't start. Test it by lifting the float and listening for the pump to engage. If it doesn't, the switch needs replacement.
Check valve matters
A check valve keeps water from draining back into the pit. If it leaks, the pump cycles constantly and the motor wears out. Replacing it is cheap and prevents a bigger repair.
Storm season prep
Before October storms, clean the pit, test the pump, and confirm the discharge line is clear. A five-minute check in September prevents a flooded crawl space in October.
Sump pump service across Naples
- Old Naples
- Park Shore
- Coquina Sands
- Moorings
- Naples Park
- Pelican Bay
- Vanderbilt Beach
- North Naples
- Golden Gate
- East Naples
- Lely Resort
- Naples Manor
- Bayshore
- Royal Harbor
Outside these areas? Call and ask, we may still cover you. +12395220157
What Naples Homeowners Say
Most repairs run $180 to $450 in 2026, depending on the part and the pump type. A float switch replacement is usually at the low end. A check valve plus discharge line repair lands in the middle. If the motor is burned out, a replacement pump adds $250 to $600 for the unit. We quote the repair before we start, so you know the number.
The three most common causes we find in Naples are a failed float switch, a clogged discharge line, and a tripped GFCI outlet. A high water table and sandy soil send grit into the pit, which jams the float. If the pump hums but doesn't move water, the impeller is likely clogged. We test all three on site and repair the actual failure.
Yes, for calls before 2 p.m. we schedule same-day sump pump repair in Naples, Florida. We keep float switches, check valves, and gaskets on every truck, so most repairs finish in one visit. Emergency calls after hours get priority dispatch. If your pit is filling now, call and we'll walk you through shutting off the inflow.
We do. Naples Sump Pump Pros repairs submersible and pedestal pumps from Zoeller, Wayne, Little Giant, Liberty Pumps, Flotec, Basement Watchdog, Superior Pump, and Everbilt. We serve Old Naples, Park Shore, North Naples, Golden Gate, and the surrounding Collier County neighborhoods. Call +1 239-522-0157 and describe the symptoms.
Need Sump Pump Repair Naples FL Today?
If your pit is filling and the pump is dead, call now. We answer the phone, walk you through stopping the inflow, and dispatch a tech with common parts on board. Same-day service for calls before 2 p.m. Emergency priority after hours.
Call Naples Sump Pump Pros
Call us at +1 239-522-0157 or email [email protected]. We answer the phone during business hours and dispatch emergency calls after hours. Same-day estimates are available for most of Naples and Collier County. If you are not sure whether you need a repair or a full install, describe what you are seeing and we will tell you straight.